|
|
Post by W Racing on Feb 10, 2010 23:48:15 GMT -7
Nice find. Incra Tiny" T-Rule www.incra.com/product_trules.htmThis is the tool I use to layout my axle locations with. It also works great for measuring the holes once they are drilled (quality check). Because you can see through it, measurements are very accurate. I picked mine up at the Local WoodCraft. |
|
|
|
Post by Fat Boy on Feb 11, 2010 7:53:17 GMT -7
looks handy !
i have a woodcraft store a few blocks away, think i will pick one up.
thanks
|
|
|
|
Post by down4derby on Feb 11, 2010 8:02:14 GMT -7
Nice find. I`m going to look for one or something similar. I drilled tiny holes in my sliding square for the same effect, however I like the fact that its see through and precise.
|
|
|
|
Post by W Racing on Feb 11, 2010 9:16:20 GMT -7
I have the Tiny one which works great for axle location.
|
|
|
|
Post by Fat Daddy on Feb 11, 2010 10:33:01 GMT -7
What did it run you for the tiny one?
|
|
|
|
Post by W Racing on Feb 11, 2010 10:39:58 GMT -7
What did it run you for the tiny one? Hi Fat Daddy!  The woodcraft store charged $16.99 NOTE: They require a 0.5 mm pencil to work well. I sometimes use a sharp #2 but the mechanical pencil is recomended. |
|
|
|
Post by Fat Daddy on Feb 11, 2010 10:47:00 GMT -7
What did it run you for the tiny one? Hi Fat Daddy! The woodcraft store charged $16.99 NOTE: They require a 0.5 mm pencil to work well. I sometimes use a sharp #2 but the mechanical pencil is recomended. My 9 year old is obsessed with mechanical pencils, I think we have about 75 kicking around the desk here, I dont think it will be a problem This is yet another excuse for me to go to Woodcraft today after I stop at Harbor Freight. I have a feeling I am gonna be in trouble when I get home |
|
|
|
Post by W Racing on Feb 11, 2010 10:52:26 GMT -7
Hi Fat Daddy! The woodcraft store charged $16.99 NOTE: They require a 0.5 mm pencil to work well. I sometimes use a sharp #2 but the mechanical pencil is recomended. My 9 year old is obsessed with mechanical pencils, I think we have about 75 kicking around the desk here, I dont think it will be a problem This is yet another excuse for me to go to Woodcraft *** TODAY *** after I stop at Harbor Freight. I have a feeling I am gonna be in trouble when I get home LoL That is a dangerous combination of stores... :-) |
|
|
|
Post by P D D R 2 on Feb 11, 2010 15:14:48 GMT -7
Nice find. Incra Tiny" T-Rule www.incra.com/product_trules.htmThis is the tool I use to layout my axle locations with. It also works great for measuring the holes once they are drilled (quality check). Because you can see through it, measurements are very accurate. I picked mine up at the Local WoodCraft. If you havent watched the video's on there tools go and watch them... Wow a video is worth a Million words... check out the video... www.incra.com/video_demos.htmThe T-Rule video is towards the bottom of the video list... Nice demo of it's use... Nice work W Racing, great find  |
|
|
|
Post by Fat Daddy on Feb 11, 2010 18:39:03 GMT -7
My 9 year old is obsessed with mechanical pencils, I think we have about 75 kicking around the desk here, I dont think it will be a problem This is yet another excuse for me to go to Woodcraft *** *** TODAY *** *** after I stop at Harbor Freight. I have a feeling I am gonna be in trouble when I get home LoL That is a dangerous combination of stores... :-) Only made it to Harbor Freight, still havent figured out how I left there without spending money. My friend who is just getting into PWD, however? Not so lucky |
|
|
|
Post by Carolina Gravity Sports on Feb 11, 2010 18:41:45 GMT -7
I just bought me one off ebay!!! I can see where this will come in handy. ;D
|
|
|
|
Post by W Racing on Feb 12, 2010 2:20:25 GMT -7
Nice find. Incra Tiny" T-Rule www.incra.com/product_trules.htmThis is the tool I use to layout my axle locations with. It also works great for measuring the holes once they are drilled (quality check). Because you can see through it, measurements are very accurate. I picked mine up at the Local WoodCraft. If you havent watched the video's on there tools go and watch them... Wow a video is worth a Million words... check out the video... www.incra.com/video_demos.htmThe T-Rule video is towards the bottom of the video list... Nice demo of it's use... Nice work W Racing, great find Wow! That video is great David... 2DB: I may just need to get the bend rule now :-) |
|
|
|
Post by Fat Boy on Feb 12, 2010 8:14:41 GMT -7
picked mine up yesterday, dang it now got to go back for the bend rule !
|
|
|
|
Post by azgreg on Feb 12, 2010 13:25:43 GMT -7
Just got mine, what a great little tool.
|
|
|
|
Post by Zeebzob on Feb 12, 2010 15:31:23 GMT -7
Thanks for sharing this! I hope you get a commision onf the sales, I just picked one up too.
|
|
