Post by P D D R 2 on Jan 2, 2010 20:13:19 GMT -7
Gravity Powered Free Rolling Only
Rules and Regulations
Shipping
- Official entry form must be filled out complete and signed per builder
- Return shipping must be payed in order to return your cars
- When you ship the package you can purchase return shipping (cost the same to return it back)
Entry Fee- $10 per car
- Cars are staged straight down the lane, wheels pulled away from the center rail and car body (Standard Staging Method)
- Custom staging instructions are allowed and must be shipped with car/cars on race day
Other
- No touching or stepping over the track
- No touching any cars
- Must conduct yourself in an orderly manner
Disqualify
- Failure to meet race requirements and/or rules
- If any part of the car comes off during the race and interferes with another car
- If the car leaves it's lane and interferes with another car
- Car causing damage to the track
1. Car Body / Dimensions
Wheel Base : Any
Height : Not to exceed 3" inches...
Length : Not to exceed 7" inches...
Width : Not to exceed 3" inches...
Weight : Not to exceed 5.0 ounces (143 grams) measured on 1/10th digital scale
Track Center Rail Height : 1/4" inch ( 7mm ) *
Track Center Rail Width : 1 5/8" inches (4.2 cm) *
* Wheels must clear the outside to outside center rail width measurement
Center Guide Rail diagram click on photos to view
2. Axles
- Open
3. Wheels
- Open
a. Maximum diameter 31mm
(If needed they will be checked with digital calibers)
4. The following Modifications are not allowed
a. Starting or finish line devices
b. Electronic or lighting devices
c. Glass or extremely fragile parts
d. Paint that is wet, smudges or extremely sticky
e. Sharp objects, sandpaper or abrasives on the bottom of car (We do not want any damage to the rubber stopping pads)
f. Axles and/or wheels attached to any device that mechanically alters rotation and/or spin
g. Propellants
h. Any part of the car to go beyond the starting peg (Red Zone)
i. Magnets
[/ul][/ul][/li][/ul]