Viper
PDDR Forum Member
[Mo0:0]
Posts: 4
|
Post by Viper on Jan 15, 2009 9:11:03 GMT -7
I would like to know if I should use a medal sleeve (tube) in the wheel bore so the wheel bore diameter will not open over many runs. I feel that wheel wobble is due to the wheel bore diameter getting bigger. Please let me know what you think and if I’m right about the bore diameter wobble.
Thanks
|
|
|
|
Post by 2FAST4U on Jan 15, 2009 19:53:25 GMT -7
I would like to know if I should use a medal sleeve (tube) in the wheel bore so the wheel bore diameter will not open over many runs. I feel that wheel wobble is due to the wheel bore diameter getting bigger. Please let me know what you think and if I’m right about the bore diameter wobble. Thanks what class did you want to run this wheel in...  |
|
Viper
PDDR Forum Member
[Mo0:0]
Posts: 4
|
Post by Viper on Jan 23, 2009 17:23:03 GMT -7
The race is not for pddr but for a engineering division of my pack. So an open mod class. I can not use oil so ball bearings are out.
|
|
|
|
Post by 2FAST4U on Jan 23, 2009 19:46:07 GMT -7
The race is not for pddr but for a engineering division of my pack. So an open mod class. I can not use oil so ball bearings are out. WHAT WHEELS DO YOU HAVE TO USE? WHAT SIZE OF AXLES DO YOU HAVE TO USE? |
|
Viper
PDDR Forum Member
[Mo0:0]
Posts: 4
|
Post by Viper on Jan 26, 2009 0:49:46 GMT -7
I was thinking of using:
wheels:
"Razor RSX" Wheel aka x-lite by derbyworx from maximum velocity
axles:
Friction-free, Graphite Coated! - PRO Super Speed axles (set of 4) from pinewood pro
i hope this help!
I would like to make a fast car but it need to run about 25 races so it needs hold up. The track is alum 50 feet. rules no oil.
|
|
