|
Post by Carolina Gravity Sports on Jan 13, 2008 10:29:03 GMT -7
If anyone has any tips for a first time airbrusher I would appreciate it. Air pressure setting, time between coats etc. After 4 PM eastern time and I will be learning as I go.
|
|
|
Post by PDDR on Jan 13, 2008 13:20:56 GMT -7
I usually set the pressure where I find it at a good flow. When using an airbrush verses a gun I thin the paint more as well. The airbrush doesn't put the paint on as thick so I dries very quickly. So the time between coats can be quicker. I usually wait about 10 minutes. Hope this helps a little.
|
|
|
Post by Carolina Gravity Sports on Jan 13, 2008 20:06:05 GMT -7
I know the first thing I have learned is to get the painting area clean. Up were my track is I have a 12X12 room in the corner that I am setting up a paint shop in. The room has some old ,dirty , dusty carpet in it and it has to go before I paint another car in there. Just too much dust and lint floating around. I believe with a little time and patience I'm going to really like painting with the airbrush.
|
|