|
|
Post by NinjaRabbi on Aug 11, 2007 18:18:35 GMT -7
I am looking to have a better finish on my cars. At this point, it's been Duplicolor Primer, Duplicolor lacquers, and Duplicolor Clear Coat. I am not ready to spend the money on an airbrush and the next level of equipment; so, does anybody have any experience with USC Icing Polyester Finishing Putty (with hardener)? I was wanting to skim coat my cars with this after sanding. I was thinking of this over bondo.
Any feedback?
Thanks,
Jim
|
|
|
|
Post by P D D R 2 on Aug 11, 2007 19:35:45 GMT -7
You can use it other than bondo... but don't use it for heavy build up... use bondo first then after you sand the bondo you can skim it out with the Icing.... I like 240 grit dry and sand the entire car with it on your last sanding before primer...  |
|
|
|
Post by F.A.S.T Racing on Aug 12, 2007 4:08:23 GMT -7
I prefer Evercoat MetalGlaze polyester finish & blending
putty,pn#100416.
I feel it sands smoother,less clogging and feathers
better. Although not recommended, I've put it on
as thick as 3/16" per layer 
As with any catalyzed filler, have plenty of ventilation!
Both are good products, availability/price could sway
your decision.....
|
|
|
|
Post by P D D R 2 on Aug 12, 2007 8:42:13 GMT -7
Although not recommended, I've put it on
as thick as 3/16" per layer
As with any catalyzed filler, have plenty of ventilation!
Shame Shame...... be careful Fast.... |
|
|
|
Post by Fat Boy on Aug 13, 2007 6:41:53 GMT -7
where do you purchase this icing you speak of.
walmart ?
auto zone ?
or do you have to go to a auto body paint shop
|
|
|
|
Post by F.A.S.T Racing on Aug 13, 2007 16:03:36 GMT -7
|
|
|
|
Post by Bad Boy Kustoms on Aug 27, 2007 8:15:59 GMT -7
You can get it at NAPA Part# 765-2697
|
|
|
|
Post by Fat Boy on Aug 27, 2007 16:31:15 GMT -7
mood,
are you referring to Duncan Hines triple chocolate with the little picture of the Hershey bar on the box !.
|
|
;D You'll have to ask Mood where he gets his chocolate icing from .... 
