|
Post by Vacationland Racing on Feb 21, 2010 12:00:23 GMT -7
Regarding "The Edge 2010 New Pure Stockr's" by JE, are there any mods that they provide as a service that are not allowed? I ask because the way I read these rules you can't modify the step on the outter hub. Am I correct or just reading too much into it? thanks in advance! Rick
|
|
|
Post by ACME Racing on Feb 21, 2010 13:08:44 GMT -7
What rules are you talking about?
|
|
|
Post by 2FAST4U on Feb 21, 2010 13:38:59 GMT -7
Regarding "The Edge 2010 New Pure Stockr's" by JE, are there any mods that they provide as a service that are not allowed? I ask because the way I read these rules you can't modify the step on the outter hub. Am I correct or just reading too much into it? thanks in advance! Rick where in the rules does it say you cant...3. Wheels BSA (new & old) a. May be sanded, polished, CnCed or lathed to remove mold casting burs, imperfections, edge of tread surface and to true the roundness b. The tread / contact surface must remain flat and parallel to the bore as humanly possible c. The small detailed marks on the edge of the wheels must remain visible around the entire circumference d. No Angling, Reshaping, Canting, Round Crowning, Tapering, H-ing, V-ing, Dishing, the outside of the wheels and / or tread surface e. No removing or reducing the letters or spokes f. No less than 7.50mm tread width (will be checked with digital calibers) g. No drilling additional holes h. No additional weight reduction is allowed other than hub reducing i. Wheel covers may be used only if entire wheel is visible
|
|
|
Post by Vacationland Racing on Feb 21, 2010 14:58:07 GMT -7
Acme: My question was regarding the Pure Stock Class. Glenn: Thanks for the response. I now understand. ;D I wasn't second guessing but I am new to this and wanted to be clear that if I order the Pure Stockr's (with the step removed) from you they will be legal for race. From now on I'll pay more attention to what's not written too. Thanks, Rick
|
|