|
Post by King Of Hearts on Feb 9, 2007 19:31:39 GMT -7
Hello All, We have never built a 3 wheel car,our rules require us to run all 4 wheels in contact with the track .We are going to send my sons backup car in,it will have to race in the stock class it has an EW.We are going to raise 1 wheel by bending an axle up. How much clearance should the raised wheel have? Or should I drill a new raised hole,I don't think this would be as easy but would it be better option? And for an alignment,how much steer on avg are some of you guys and gals using?I hear some people say 1" of steer in 2' of travel.I know the only way to find out for sure is to test,but I wanted to get a general starting point. Thanks, KOH
|
|
|
Post by King Of Hearts on Feb 10, 2007 15:56:06 GMT -7
Ok we could not wait.We drilled a new hole ;D.And did you guys see the test video the Jewkes boys did for the Model boys .I got my answer for how much steer from there . Thanks JE! KOH
|
|
|
Post by 2FAST4U on Feb 10, 2007 19:04:48 GMT -7
Ok we could not wait.We drilled a new hole ;D.And did you guys see the test video the Jewkes boys did for the Model boys .I got my answer for how much steer from there . Thanks JE! KOH just send $4.95 if you use the the modle boys video... for help in any way... I will keep this on an honer system... Thank you...
|
|
|
Post by King Of Hearts on Feb 10, 2007 20:17:09 GMT -7
The $4.95 will be in the box with the car for the march race .If our car isn't up to snuff we will be expecting the same "family"treatment that the Model boys got ;D ;D ;D.Or I will need to use the "family"discount . KOH
|
|
|
Post by 2FAST4U on Feb 10, 2007 20:50:48 GMT -7
The $4.95 will be in the box with the car for the march race .If our car isn't up to snuff we will be expecting the same "family"treatment that the Model boys got ;D ;D ;D.Or I will need to use the "family"discount . KOH
|
|
|
Post by Hillbilly Kustoms on Feb 20, 2007 10:03:13 GMT -7
Where is the video? I did a search and couldn't find it.
|
|
|
Post by alineperformance on Feb 20, 2007 10:13:06 GMT -7
Look in category "videos" the second thread is for Model Boys.
|
|
|
Post by Hillbilly Kustoms on Mar 2, 2007 19:15:22 GMT -7
Liquid Fire was set up as a 3 wheeler but not to ride the rail. After doing some research we widened the rear dominate bodyside a 1/16th and then did the bent front dominate axle. Mod's are sometimes fun and a challenge to figure out a way to make it work without becoming too much work. We almost sectioned the car to narrow the front and shorten the WB so we could be in the pure stock class. Decided to choose easy and went with a simple mod to get same result.
|
|