Post by P D D R 2 on Jan 3, 2010 4:50:40 GMT -7
2011 Not running this class this year
Gravity Power Free Rolling Only
Rules and Regulations
Shipping
- Official entry form must be filled out complete and signed per builder
- Return shipping must be pre payed in order to return your cars
- When you ship the package you can purchase return shipping (cost the same to return it back)
- $25 extra charge if you elect PDDR to process unpaid or improper amount return shipping
Entry Fee
- $12 per car (plus all shipping costs to and from)
Staging
- Cars are staged straight down the lane, wheels pulled away from the center rail and car body (Standard Staging Method)
- Custom staging instructions are allowed and must be shipped with car/cars on race day
- Entrants that attend live have the "option" to stage their own
Other
- No touching or stepping over the track
- No touching anyones car (other than to stage own car)
- Must conduct yourself in an orderly manner
Disqualify
- Failure to meet race requirements and/or rules
- If any part of the car comes off during the race and interferes with another car
- If the car leaves it's lane and interferes with another car
- Car causing damage to the track
1. Car Body / Dimensions [/u] [/size]
Wheel Base : Any
Height : Not to exceed 3" inches...
Length : Not to exceed 7" inches...
Width : Not to exceed 3" inches...
Weight : Not to exceed 5.0 ounces (143 grams) measured on 1/10th digital scale
Track Center Rail Height : 1/4" inch ( 7mm ) *
Track Center Rail Width : 1 5/8" inches (4.2 cm) *
* Wheels must clear the outside to outside center rail width measurement
Center Guide Rail diagrams click on photos to view
2. Axles
a. Open
3. Wheels
BSA (new and/or old)
a. May be CnCed, lathed, polished and/or sanded to true the edge of tread, surface and circumference
b. The tread / contact surface must remain flat and parallel to the bore as humanly possible
c. Some of the small detailed marks at the edge of the tread must remain visible around the entire circumference
d. No Angling, Reshaping, Canting, Round Crowning, Tapering, H-ing, V-ing, Dishing, the outside of the wheels and/or tread surface
e. No removing or reducing the letters or spokes
f. 7.50mm Minimum Tread Width / 31mm Maximum Diameter
g. No drilling additional holes
h. No additional weight reduction is allowed other than hub reducing
i. Wheel covers may be used only if entire wheel is visible
(Wheels will be checked with digital calibers if needed)
4. The following Modifications are not allowed
a. Magnets
b. Starting or finish line devices
c. Electronic or lighting devices
d. Glass or extremely fragile parts
e. Paint that is wet, smudges or extremely sticky
f. Bearings
g. Sharp objects, sandpaper or abrasives on the bottom of car (We do not want any damage to the rubber stopping pads)
h. Any part of the car to go beyond the starting peg (Red Zone)
i. Axles and/or wheels attached to any device that mechanically alters rotation and/or spin
j. Propellants