|
Post by jeremybeaudoin on Jun 19, 2011 13:21:08 GMT -7
What are the restrictions as far as machining of the wheels and axles for the door slammr class?
|
|
|
Post by resophonic1 on Jun 19, 2011 13:56:13 GMT -7
Not much other than following the size restrictions in the slammer rules section:
2. Axles
a. Minimum diameter .084
3. Wheels
Open Plastic Type
a. May be sanded, polished, CnCed or lathed b. The tread / contact surface must remain flat and parallel to the bore as humanly possible c. No less than 7.50mm tread width d. No greater than 31mm diameter
(If needed they will be checked with digital calibers)
|
|
|
Post by jeremybeaudoin on Jun 19, 2011 20:08:39 GMT -7
Thank you, Open means anything as long as the overall dim. are good. This is my first door slammr i don't want to break the rules from the begining
|
|
|
Post by P D D R 2 on Jun 19, 2011 21:44:17 GMT -7
Thank you, Open means anything as long as the overall dim. are good. This is my first door slammr i don't want to break the rules from the begining As long as they are some form of Plastic and meet the dimensions have fun building them... They do not have to be made from kit wheels.
|
|