|
Post by KB Racing on Nov 10, 2009 5:34:49 GMT -7
Car is finished wheels are on but not glued in. Still need to set up the steer on the DFW. What is the next step to get the car flying. I do have a small test track about 24 ft. Do I just start running the car as much as I can. Or should I be spending time working more graphite in and spinning the wheels to break them in. Thanks KB
|
|
|
Post by ACME Racing on Nov 10, 2009 6:52:12 GMT -7
Car is finished wheels are on but not glued in. Still need to set up the steer on the DFW. What is the next step to get the car flying. I do have a small test track about 24 ft. Do I just start running the car as much as I can. Or should I be spending time working more graphite in and spinning the wheels to break them in. Thanks KB Why are you glueing the axles in? If your test track is similar to a Best track then use it to set up your steer as best you can. Post pictures.
|
|
|
Post by Fat Boy on Nov 10, 2009 6:52:21 GMT -7
graphite it up and do some pre spin for sure.
put a mark on your DFW axle head at 12:00 with the bend down.
start test runs, i will bet some where around 11:00 on the axle will get your best times.
i would get my best time, relube, run about 3 more runs, pack it up and go kiss the girl.
|
|