Post by P D D R 2 on Dec 8, 2007 11:06:01 GMT -7
Gravity Powered Free Rolling Only
Rules and Regulations
Shipping
Official entry form must be filled out complete and signed per builder
Return shipping must be payed in order to return your cars
When you ship the package you can purchase return shipping (cost the same to return it back)
Entry Fee
$10 per car
Staging Method
Cars are staged straight down the lane, wheels pulled away from the center rail and car body / Standard Staging Method
Custom staging instructions are allowed and must be shipped with car / cars on race day
Other
- No touching or stepping over the track
- No touching any cars Must conduct yourself in an orderly manner
Disqualify
Failure to meet race requirements and/or rules
If any part of the car comes off during the race and interferes with another car
If the car leaves it's lane and interferes with another car
Car causing damage to the track
1. Car/Truck Specifications
Wheel Base : You can not alter the wheel base with respect to the wheel openings of the car body
Height : Not to exceed 4" inches...
Length : Not to exceed 9 inches...
Width : Not to exceed 3.5" inches
Weight : Not to exceed 6.0 ounces (170 grams) 1/10th Digital scale used
- No convertibles
- 1/24th or 1/25th scale size plastic, metal or wood bodies may be used
- Other bodies also allowed as long as the make and model are clearly identified, 1/24th or 1/25th scale size
- Additional materials may be added as long as they meet the Car Dimensions above
- Original roofs, doors, fenders, grills, hoods, trunks and main body parts must be used
- No covering the fender and / or outside wheel openings of the body
- Car must have at least 4 axles and wheels
- The axles and wheels must be attached to the side of the car body / frame in the original wheel wells and / or fenders
- Wheel tread surface must be completely under the fenders and / or body
2. Axles
a. Minimum diameter .084
3. Wheels
[/b]7.50mm / .295 inches Minimum Tread Width / 31mm / 1.22 inches Maximum Diameter
a. Tread must remain flat and level to axle bore
b. All lettering inside and out must be intact and visible
(Wheels will be checked with digital calibers if needed)
4. The following Modifications are not allowed
a. Starting or finish line devices
b. Electronic or lighting devices
c. Paint that is wet, smudges or extremely sticky
d. Sharp objects, sandpaper or abrasives on the bottom of car
(We do not want any damage to the rubber stopping pads)
e. Any part of the car to go beyond the starting peg (Red Zone)
f. Propellant
4e Rule / Click on photo to view
Track Specifications
Center Rail Height : 1/4" inch ( 7mm) *
Center Rail Width : 1 5/8" inches (4.2 cm) *
* Wheels must clear the outside to outside center rail width measurement
Track Specifications >>> click on photo to view
[/ul][/span]