|
Post by 2FAST4U on Jun 3, 2007 19:01:41 GMT -7
JUNE RESULTS THIS IS AS THE RACE WAS... WILL BE ADJUSTED FOR POINTS...
|
|
|
Post by derbydoc on Jun 3, 2007 20:40:55 GMT -7
Man, The top 5 are smokin fast. After seeing my car running 3.01s, I was hoping to get top 3 but DANG. Leo is the man. 2.9882 avg. I just dont see me ever catching up to that. Cam Car was Awesome, and I see Creig made a nice debut, Congrats on that. Thanks for the results. At least theres 5 weeks before the next race this month so Ill have an extra week to tune on Pressure. I think I can get that car down to 3.00s. Im almost afraid to mess with it since its my fastest setup to date. Everybody check out the minimum times between 5th and 10th, thats some close racing!!!! Great job RC Racing for your p stock debut.
|
|
|
Post by 94 GT Laser RC on Jun 4, 2007 5:30:25 GMT -7
... Everybody check out the minimum times between 5th and 10th, thats some close racing!!!! Great job RC Racing for your p stock debut. Thanks Tory.... I noticed that too before I read the post. It's amazing how barely 1 second separates 1 from 19 after six races. IM satisfied with my first PS race....this is a drastic change from the Ebay shootout... I dont realy "design" the cars any differently, just put a little more care into wheel/axle prep, and more time on tuning....Thanks again for all of you here that have helped me (you know who you are!) RC
|
|
|
Post by Fat Boy on Jun 4, 2007 6:40:45 GMT -7
congrats to all who made improvements !
I really thought i sent in a faster car this month, so back to the board.
sure would like to have a web cam in that 234 shop !
with no test track to use, does anybody else have a method for testing.
i have an alignment board that works well.
any advise would be appreciated
|
|
|
Post by 94 GT Laser RC on Jun 4, 2007 7:38:14 GMT -7
congrats to all who made improvements ! with no test track to use, does anybody else have a method for testing.i have an alignment board that works well. any advise would be appreciated As far as I know...the alignment board is as far as you can go without a track and timer. Even with that I find that my cars that are "perfectly" aligned dont always do as well as those with a slight bent...in which case the test board was obsolete. My "dog" in the Ebay challenge had a HARD right curve. Jewkes tuned it to a "soft" curve and got it to run I think second. In that case the board helped. I may be selling my track fairly cheap, but it would be pickup only since it is way to hard to package. Good Luck. RC
|
|
|
Post by Tye Racing on Jun 4, 2007 8:45:32 GMT -7
man, there are some fast cars on here..
Ol'red is being retired after one race. maybe trash it totally after i steal the weights and wheels. frustration.... ugh
|
|
|
Post by Cam-Car Racing on Jun 4, 2007 9:35:23 GMT -7
Congratulations 234 for your wins at both PDDR and PWD. If you want to send me an early Christmas present, let me know your secret.
Congrats to everyone else who raced.
|
|
|
Post by johna745 on Jun 4, 2007 9:43:49 GMT -7
I do'nt think you need much help Cam-Car ;D ;DCongrats on your sub three
|
|
|
Post by docb on Jun 4, 2007 9:48:52 GMT -7
Congratulations 234 for your wins at both PDDR and PWD. If you want to send me an early Christmas present, let me know your secret. Congrats to everyone else who raced. Um...CamCar...Looks to me like you found the secret as well...If you'd like to send me a late birthday present just hit that little button that says PM and I would gladly accept. ;D
|
|
|
Post by Tye Racing on Jun 4, 2007 10:19:02 GMT -7
my birthday is TOMORROW<,,, send me the secret
|
|
|
Post by Fat Boy on Jun 4, 2007 11:08:19 GMT -7
id just like to know if its graphite or juice ?
|
|
|
Post by Cold Basement Racing on Jun 4, 2007 15:49:13 GMT -7
I know Cam-Car is using graphite. I'm not sure what 234 is using though I suspect its oil. Of course 234 would be able to tell you better than I would.
Congrats to both 234 and Cam-Car for amazingly fast times!
|
|
|
Post by Grumpy Racing on Jun 4, 2007 21:58:18 GMT -7
;DCongrats to 234. That car was extremly fast!!! Congrats as well to Mr. Cam Car on the sub 3 seconds. You've got it going on!!!! -G
|
|
|
Post by 94 GT Laser RC on Jun 5, 2007 4:41:13 GMT -7
I know Cam-Car is using graphite. I'm not sure what 234 is using though I suspect its oil. Of course 234 would be able to tell you better than I would. Congrats to both 234 and Cam-Car for amazingly fast times! Hob-E-Lube Here! (but nobody cares about the 10th place car..LOL) Anyone else? RC
|
|
|
Post by derbydoc on Jun 5, 2007 15:19:13 GMT -7
Hob-E-Lube on the Jewkes Engineered Axles. Wheels were done on my lathe.
|
|