|
Post by P D D R 2 on Apr 17, 2011 16:55:37 GMT -7
|
|
|
Post by strattocoaster on Feb 23, 2012 13:57:07 GMT -7
What exactly does open wheel base mean?
|
|
|
Post by P D D R 2 on Feb 23, 2012 15:10:27 GMT -7
For example: Standard kit come with 4- 3/8" inch wheel base.
You can change the location of the axle placement as long as they remain within the rest of the rules.
This class is pretty open. You can build the car from just about any material.
|
|
|
Post by strattocoaster on Mar 12, 2012 12:14:02 GMT -7
What about open axles?
|
|
|
Post by P D D R 2 on Mar 12, 2012 14:18:38 GMT -7
*Open = Any, as long as they comply with "section 4" *
Rules below.
Thank you 1. Car Body / Dimensions [/u] [/size] Wheel Base : Open Height : Not to exceed 3" inches... Length : Not to exceed 7" inches... Width : Not to exceed 3" inches... Weight : Not to exceed 5.0 ounces (143 grams) measured on 1/10th digital scale Track Center Rail Height : 1/4" inch ( 7mm ) *Track Center Rail Width : 1 5/8" inches (4.2 cm) ** Wheels must clear the outside to outside center rail width measurement Center Guide Rail diagram click on photos to view 2. Axles 3. Wheels a. Maximum diameter 31mm ( If needed they will be checked with digital calibers) 4. The following Modifications are not allowed a. Starting or finish line devices b. Electronic or lighting devices c. Glass or extremely fragile parts d. Paint that is wet, smudges or extremely sticky e. Sharp objects, sandpaper or abrasives on the bottom of car ( We do not want any damage to the rubber stopping pads) f. Axles and/or wheels attached to any device that mechanically alters rotation and/or spin g. Propellants h. Any part of the car to go beyond the starting peg ( Red Zone) *Open = Any, as long as they comply with "section 4" *4 h. Rule / Click on photo to view
|
|
|
Post by strattocoaster on Mar 13, 2012 7:31:05 GMT -7
Thanks.
|
|