Post by P D D R 2 on Dec 16, 2007 13:13:39 GMT -7
Super Stock |
Rules and Regulations
One Super Stock car per Builder name.
Once you enter a car in a builder name that car must remain
with the builder that it was entered with.
You may use multiple builder names but each car that is entered with a builder can only score points for that name.
You can use any car that you have built over the years as long as they meet the race requirements.
Cars are staged straight down the lane and the wheels pulled away from the center rail and body of the car.
We allow further staging instructions for entrants, they must be in the shipping box with car/cars on race day.
Entrants that are live have the "option" to stage there own cars.
2 runs in each lane with the lowest total average time the winner.
No running, touching, or stepping over the track.
No touching any ones car. (other than to stage own car)
Must conduct yourself in an orderly manner.
**Race Requirements**
Car Dimensions
Wheel Base : .........Any wheel base is allowed as long as it meets the dimensions and race requirements.
Height : ................Not to exceed 2-3/4" inches ( 7cm )
Length : ...............Not to exceed 7" inches ( 17.8 cm )
Weight : ................Not to exceed 5" ounces ( 142 grams )
Width : ..................Not to exceed 2-3/4" inches ( 7 cm )
Center Rail Height : ....1/4" inch ( 7mm ) *
Center Rail Width : .....1- 5/8" inches (4.2 cm) *
* Center Rail height and width are the actual measurements of the track,
so you must build the car to clear these dimensions for the wheels to ride on the track,
outside of the rails not on the inside.
1: Pinewood Derby Kits
a. Any kit is allowed as long as it meets the race requirements.
b. Use of other materials to make your own body.
c. The main part of the body can be made of any material.
as long as they meet the race requirements.
d. Car must have at least 4 wheels and 4 Axles
2: Axles
a. Any type of Axles are allowed as long as they meet the race requirements
b. No Axle bearings
c. Axles and wheels must not be attached to any device that mechanically or other wise alters rotation and/or spin
3: Wheels
a. Wheels may be drilled, sanded, polished, Machined, CnC'ed or any other method used to make a set and/or purchase a set of your choice as long as they meet the race requirments.
b. No part of the wheel that comes in contact with the track may be painted
c. Wheels may be made from other types of materials that meet the race requirements
d. Tread surface area must be flat across the entire width
e. No Canting, Angling, Rounding, Crowning, H-cutting, V-cutting or any other tread surface modifications. (other than truing up the circumference.)
f. Wheel diameter No greater than 31mm.
g. Wheel tread surface width No less than 7.50 mm
h. No Wheel bearing
i. Other wheel modifications are allowed as long as they meet the race requirements
j. Wheels do not have to come from a kit.
4: The following Modifications are Forbidden
You can not use...
a. Springs
b. Magnets
c. Starting or finish line devices or propellants.
d. Electronic or lighting devices
e. Glass or extremely fragile parts
f. Paint that rubs off, smudges or extremely sticky
g. Loose objects on car
h. Bearings
i. Sharp objects on the bottom of car. (We do not want any damage to the rubber stopping pads)
j. Any part of the car to go beyond the starting peg.
k. Sticky substances or anything on the car to aid with the starting peg.